技术员联盟提供win764位系统下载,win10,win7,xp,装机纯净版,64位旗舰版,绿色软件,免费软件下载基地!

当前位置:主页 > 教程 > 硬件教程 >

多个IP选择线路的解决办法之route命令

来源:技术员联盟┆发布时间:2018-03-15 06:21┆点击:

  一台电脑两条线路一个电信IP一个联通的IP,解决访问电信的时候自动走电信线路,访问联通的时候自动走联通的线路,我们可以用到下面这个命令

  ROUTEDOS命令我们都可以在 Cmd 下用 route /? 来查看他的帮助信息

  先看一下他的帮助

  Manipulates network routing tables.

  ROUTE [-f] [-p] [command [destination]

  [MASK netmask] [gateway] [METRIC metric] [IF interface]

  -f Clears the routing tables of all gateway entries. If this is

  used in conjunction with one of the commands, the tables are

  cleared prior to running the command.

  -p When used with the ADD command, makes a route persistent across

  boots of the system. By default, routes are not preserved

  when the system is restarted. Ignored for all other commands,

  which always affect the appropriate persistent routes. This

  option is not supported in Windows 95.

  command One of these:

  PRINT Prints a route

  ADD Adds a route

  DELETE Deletes a route

  CHANGE Modifies an existing route

  destination Specifies the host.

  MASK Specifies that the next parameter is the 'netmask' value.

  netmask Specifies a subnet mask value for this route entry.

  If not specified, it defaults to 255.255.255.255.

  gateway Specifies gateway.

  interface the interface number for the specified route.

  METRIC specifies the metric, ie. cost for the destination.

  All symbolic names used for destination are looked up in the network database

  file NETWORKS. The symbolic names for gateway are looked up in the host name

  database file HOSTS.

  If the command is PRINT or DELETE. Destination or gateway can be a wildcard,

  (wildcard is specified as a star '*'), or the gateway argument may be omitted.

  If Dest contains a * or ?, it is treated as a shell pattern, and only

  matching destination routes are printed. The '*' matches any string,

  and '?' matches any one char. Examples: 157.*.1, 157.*, 127.*, *224*.

  Diagnostic Notes:

  Invalid MASK generates an error, that is when (DEST & MASK) != DEST.

  Example> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1

  The route addition failed: The specified mask parameter is invalid

  (Destination & Mask) != Destination.

  Examples:

  > route PRINT

  > route ADD 157.0.0.0 MASK 255.0.0.0 157.55.80.1 METRIC 3 IF 2

  destination^ ^mask ^gateway metric^ ^

  Interface^

  If IF is not given, it tries to find the best interface for a given

  gateway.

  > route PRINT

  > route PRINT 157* .... Only prints those matching 157*

  > route CHANGE 157.0.0.0 MASK 255.0.0.0 157.55.80.5 METRIC 2 IF 2

  CHANGE is used to modify gateway and/or metric only.

  > route PRINT

  > route DELETE 157.0.0.0

  > route PRINT

  route - 显示 / 操作IP选路表

  总览 SYNOPSIS

  route [-CFvnee]

  route [-v] [-A family] add [-net|-host] target [netmask Nm] [gw Gw] [metric N] [mss M] [window W] [irtt I][reject] [mod] [dyn] [reinstate] [[dev] If]

  route [-v] [-A family] del [-net|-host] target [gw Gw][netmask Nm] [metric N] [[dev] If]

  route [-V] [--version] [-h] [--help]

  描述 DESCRIPTION

  route程序对内核的IP选路表进行操作。它主要用于通过已用ifconfig(8)程序配置好的接口来指定的主机或网络设置静态路由。

  选项 OPTIONS

  -v

  选用细节操作模式

  -A family

  用指定的地址族(如`inet',`inet6')。

  -n

  以数字形式代替解释主机名形式来显示地址。此项对试图检测对域名服务器进行路由发生故障的原因非常有用。

  -e

  用netstat(8)的格式来显示选路表。-ee将产生包括选路表所有参数在内的大量信息。

  -net

  路由目标为网络。

  -host

  路由目标为主机。

  -F

  显示内核的FIB选路表。其格式可以用-e 和 -ee选项改变。

  -C

  显示内核的路由缓存。

  del

  删除一条路由。

  add

  添加一条路由。

  target

  指定目标网络或主机。可以用点分十进制形式的IP地址或主机/网络名。

  netmask Nm

  为添加的路由指定网络掩码。

  gw Gw

  为发往目标网络/主机的任何分组指定网关。注意:指定的网关首先必须是可达的。也就是说必须为该网关预先指定一条静态路由。如果你为本地接口之一指定这个网关地址的话,那么此网关地址将用于决定此接口上的分组将如何进行路由。这是BSD风格所兼容的。

  metric M

  把选路表中的路由值字段(由选路进程使用)设为M。

  mss M

  把基于此路由之上的连接的TCP最大报文段长度设为M字节。这通常只用于优化选路设置。默认值为536。

  window W

  把基于此路由之上的连接的TCP窗口长度设为W字节。这通常只用于AX.25网络和不能处理背对背形式的帧的设备。

  irtt I

  把基于此路由之上的TCP连接的初始往返时间设为I毫秒(1-12000)。这通常也只用于AX.25网络。如果省略此选项,则使用RFC1122的缺省值300ms。

  reject

  设置一条阻塞路由以使一条路由查找失败。这用于在使用缺省路由前先屏蔽掉一些网络。但这并不起到防火墙的作用。

  mod, dyn, reinstate

  设置一条动态的或更改过的路由。这些标志通常只由选路进程来设置。这只用于诊断目的,

  dev If